|
We have the following good used swivels / swivel available:
All
of the swivels spin / rotate freely.
PICTURED BELOW: Qty ONE Good Used (SILVER Colored) Miller Swivel Model GG (Jaw x Jaw) with pins - 15
ton safe working load limit. Weight 40 pounds - 4" diameter - 17" overall length
|
| Miller 15 ton jaw X jaw Swivel |
PICTURED BELOW: Qty ONE Good Used - (RED) Miller Swivel Model GG (Jaw x Jaw) NO PINS 15 ton safe working load
limit. Weight 40 pounds - 4" diameter - 17" overall length
|
| Miller 15 ton jaw X jaw Swivel |
(PICTURED BELOW): Qty TWO Good Used - Miller Swivel Model GG (Bullet x Eye) With Pin 15 ton safe working
load limit. Weight 40 pounds - 4" diameter - 17" overall length
|
| 15 ton Miller jaw X bullet Swivel |
(PICTURED BELOW) We also have one - 8 ton ( Eye X Eye ) Swivel.
|
| 8 ton eye X eye Swivel |
(PICTURED BELOW) We have a very good used 25 ton snatch block available: 25 ton McKissick
Champion (model No. 406) 10" diameter single sheave bronze bushed tail board snatch block with a 1 1/4" pin. This snatch block takes standard wire rope sizes from ¾” to 7/8”. There
is no hook on the block. (15-1/4” overall length x 11” wide) - 8” length from the center of sheave to the
center of removable pin. Block weighs 45 pounds. This block has
the original manufacturer’s metal tag on it with the capacity on it. The sheave spins very
freely.
|
| 25 ton McKissick Snatch Block |
|
| 25 ton McKissick Snatch Block |
|
| 25 ton McKissick Snatch Block |
(PICTURED BELOW) We have the following used ( UNKNOWN BRAND ) 28 TON Crane Lifting Block - (2 - 18 inch
SHEAVES) 7/8" CABLE - has a crosby hook - weighs 625 pounds - Length= 45" (from top of sheave to bottom
of hook - Width = 22" - 11" thick
|
| 28 ton Crane Block |
|
| 28 ton Crane Block |
(PICTURED BELOW) We have the following used ( UNKNOWN BRAND ) Crane Block - ONE SHEAVE 20" DIA -
3/4" CABLE - 15 TON - Weight 325 pounds
|
| 15 ton Crane Block |
|
| 15 ton Crane Block |
|
| 15 ton Crane Block |
Email Us With Any Questions Or Requests!
|
