|
Email Us With Any Questions Or Requests!
11 foot 6 inch Terra Form Mining Machine
Wheel Drive - 100HP
Pacemaker electric motor connected to a Sundstrand hydraulic pump (model 24-2008). This pump feeds 3 Sundstrand hydraulic
model (23-4001)pumps which powers the wheel. 50HP Pacemaker electric motor for misc. power. THERE ARE NO THRUST jacks on the
machine right now. It originally had eight - 150 ton x 96" stroke Rodgers hydraulic jacks. Machine has two hydraulic stabilizing
fins. This TBM's steel body structure is in very good sound condition. The hydraulics and electrical components would have
to be inspected and proboably upgraded due to this TBM being stored for a while. Asking $39,000.00 or best offer.
We have roughly 1800 feet of 4OT mining machine electrical power cable cords
available for powering the following two 97 inch and 104 inch Decker tunnel boring machines listed below. We are asking $13.00
per foot OBO for this cable.
__________________________
|
| Silver Colored 104 inch Decker TBM |
Silver Colored 104 Inch Decker
Tunnel Boring Machine. TBM has been stored inside since it was revamped after its last project. This TBM just needs a start
up procedure done and its ready to go!
Make:
Carl W. Decker
Steering:
3 steering pads
Diameter of cut:
104 inches (for 84” jack pipe or ribs and lagging tunnel)
Push Jacks:
8 jacks- 54”stroke-4”inch Dia.
Open/ Close Face:
Open face with guillotine door
Electrical H.P:
Lincoln 150 H.P
for wheel drive/ w 27 series Sunstran and hydraulic pump( 5000 psi) driving
4 Staffa Hyd. motors on wheel. Lincoln 75 H.P.(Serial 1274024) driving Delevan Hyd. Hydraulic Pumps: Pump(PU 443OR-320-36) and series 21 Sunstran Hyd. Pump(5000) for steering, push jacks, conveyor,
steering pads.
Conveyor, rib expander, trailing sleds,conveyor
support.
Asking $75,000.00 for everything mentioned ABOVE fob
Detroit, Michigan
Other 104” TBM support items: Asking $10,000.00
fob Detroit, Michigan for the following two listed items BELOW.
Hydraulic support unit for jack pipe operations;
3-50 H.P. Lincoln electric motors with 10,000 P.S.I. Rivett pumps(9004800) ( serial 30541) ( model PF- 3015-2192)
Jacking frame w/ 4 hydraulic rams 10,000 PSI,
11 Ft. longw/ 10’6” stroke
|
| 97 Inch Decker TBM |
97” Decker Tunnel Boring Machine
Make:
Carl W. Decker
Steering:
Articulated
Cut Diameter:
97 inch
Push stroke:
8- 54 inch stroke jacks, 4inch Dia.
Open/close face:
Open w/ Guillotine Door
Electrical Horse power:
150 H.P Lincoln Elect.(Serial 1854742 Lincoln and TM3023-A1-CC) Motor
driving 4 Vickers Hyd. Vane Hydraulics Motors(5000
psi)(Model# MHT 13N1 30 Troy, Michigan)
75 H.P Lincoln elect. motor( Serial# 1998630,
Lincoln # TM-3596-A2-CC driving Series 21 Sunstran(5000 PSI) and Rivet Hydraulic pump( 5000 PSI)(PU-4033-2117, Model#
23393) for driving the conveyor, push jacks, steering.
Conveyors, conveyor rings.
Asking
$75,000.00 for everything mentioned ABOVE fob Detroit, Michigan
Other 97” TBM support items: Asking $10,000.00
fob Detroit, Michigan for the following two listed items BELOW.
Hydraulic support unit for jack pipe operations;
3-50 H.P. Lincoln electric motors with 10,000 P.S.I. Rivett pumps(9004800) ( serial 30541) ( model PF- 3015-2192)
Jacking frame w/ 4 hydraulic rams 10,000 PSI,
11 Ft. longw/ 10’6” stroke
|
