... Special Discounted Sale Prices ...

| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

Construction Equipment Company LLC - Tunnel Equipment, Mining Equipment and General Underground Construction Suppliers

Equipment For A Tunneling Tunnel Mining Contractor

We have put the following items on this link page that we feel could be useful to a tunneling tunnel mining contractor.

Each of the above items have their own link page but we combined all of them to this page for convenience.

Please see the description and photos of Mining ( Tunnel Tunneling ) Equipment we have for Sale.

All of these items are located at our construction yard address below:

Construction Equipment Company (248) 948-9919 – Contact - Andrew DiPonio
21720 West Eight Mile Road
Southfield, Michigan 48075

We have the following 24 guage flat rail cars available:

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

(PICTURED BELOW) - We have QTY 08 Tunnel Mining Rail Flat Cars - 24 GA gauge gage - 14" diameter rail wheels - 2.75 inch diameter axles - with Willison couplers

Estimate weight = 1800 pounds with couplers 1500 pounds with no couplers

Frame dimensions = (6.5 ft long x 38 in wide x 17 in height on top of rail) add 17" on each side for coupler - 3 -1/2" wheel bearing tread width - Two of the cars has only one coupler but we have two long ones in the shop.

Rating is two tons per wheel - (Timken 3920 cup and Timken 3982 cone each wheel)

24 guage gage flat rail car

We have the following ( QUANTITY 8 ) round bottom steel muck car rail boxes available:
(PICTUED BELOW): 2.25 cubic yard cyd, 18 gage gauge tunnel muck car boxes. These pictured boxes have the following dimensions: ( 4 ft. 7 in. wide X 6 ft. 6 in. long X 3 ft high).
Asking $1,500.00 for each muck rail car

2.25 cubic yard round bottom steel mud box rail cars

(PICTURED BELOW): We also have ( QUANTITY 5 ) - 1.5 cubic yard cyd, 18 gage gauge tunnel muck car boxes with the following dimensions: ( 3 ft. 9 in. wide X 6 ft. 6 in. long X 2 ft. 7 in. high).

1.5 cubic yard steel round bottom mud box rail car

We have the following 24 gauge gage Tunnel Air Compressor Rail Car and 18 to 24 gauge Tunneling Pump Rail Car Container available:

(Pictured Below) - We have the following - 440 volt 3 phase electric air compressor fitted to a 24 gage rail flat car. This rail car has FOUR 12 inch diameter sized rail wheels.

(Pictured Below) - We have the following - 440 volt 3 phase electric air compressor fitted to a 24 gage rail flat car. This rail car has FOUR 12 inch diameter sized rail wheels.
This car has an Ingersol Rand (ser number 6628572104) 85 Gyro-Flo air compressor and tank.
The actual delivery of the compressor is 85 cfm with a normal operating pressure of 100 psi.
The compressor is powered by the following electric motor: Westinghouse Type CS Linestar induction motor - Frame 364 - 20 horsepower - 3 Phase - 60 Cycles - 220/440 Volts - 49/24.5 Amps - RPM Full Load 1770 - Class 1 - Continuous Rating at full load 55 - Style # 1071216 - Serial # 5311.

Ingersol Rand Electric Air Compressor rail car

(Pictured Below) - We have the following ( 1 cubic yard ) Pump Rail Car Available:

This pump car has a total of EIGHT - 10 inch diameter rail wheels and is set up to ride on either 18 or 24 gage rail.

A 440 volt 3 phase pump is mounted on the bottom part of the box container.

The inside dimensions of the box is 6 ft 7 in (long) x 3 ft 2 in (wide) x 1 ft 5 in (deep). Approx 1 cubic yard capacity.

Pump Rail Car

We have the following Steel Man Lifting Cage available:

The cage is 60 inches wide X 30.5 inches deep X 41.5 inches high

The entrance opening is 30 inches wide X 41.5 inches high

The cage has four - 7 foot long 5/8" cables connected to a 7/8" thick lifting ring at the top end and a 5/8" shackle at the bottom end.

We are asking $595.00 for this man cage.

Man lifting cage

We also have TWO lifting bridals for locomotive battery boxes.

Please see the pictures below showing the Black colored lifting bridal. The bridals are 51 inches long by 41 inches wide and they weigh 140 pounds each. We are asking $100.00 for each lifting bridal.

Lifting Bridal

Locomotive Dinky Battery Box Lifting Bridal

We have the following Mayo Couplers ( Coupler Couplings ) available. Please see the two pictures BELOW.

Asking $75.00 each coupler

Mayo Coupler Couplings

We have barrels and barrels of the following track bolts available: ( PLEASE SEE THE QUANTITIES BELOW AND THEN THE PICTURES FURTHER BELOW )

QTY TWO – Wood Keg Barrels (Each half full): 1/2 in. X 2 -1/2 in. track bolts. Asking $50.00 each keg

QTY THREE – Wood Keg Barrels (Full Barrel): 1/2 in. X 3 in. track bolts. Asking $100.00 each keg

QTY ONE – Wood Keg Barrel ( 1/4 full): 5/8 in. X 3 in. track bolts. Asking $75.00 for the keg

QTY One – 5 gal pail ( ½ full): 5/8 in. X 3 – ¼ in. Asking $75.00 for this pail

QTY ONE – Wood Keg Barrel ( 1/2 full): 5/8 in. X 3 – 1/2 in. track bolts. Asking $75.00 for this keg

QTY One – 7 gal pail ( ½ full): 3/4 in. X both 4 in and 4 -1/2 in. Asking $75.00 for this pail

QTY One – 5 gal pail ( ½ full): 7/8 in. X 5 in. Asking $85.00 for this pail

QTY ONE – Wood Keg Barrel ( 1/2 full): 1 in. X 6 in. track bolts. Asking $100.00 for this Keg

Track Bolts

Construction Equipment Company has HEX drive drill steel as well as Timken black steel and Timken carbide rock drill bits ( bit ).

We carry HEX Drive drill steel from lengths of 1 foot up to and between 8 foot long. (PLEASE SEE THE SAMPLE PICTURE BELOW)

Hex Drive Drill Steel

Please see the table below showing the quantities and sizes regarding our NEW & USED Hex Drive Drill Steel that we have available:

New and Used Drill Steel Spreadsheet

We also have many different sizes of NEW (old stock) Timken (Black Steel) Rock Bits.

Please see the sample pictures below showing what these Timken Black Steel Rock Bits look like.

Black Steel Rock Bits

Please see the table below showing the quantities and sizes of these BLACK STEEL (non carbide) rock bits that we have available:

Black Steel Timken Rock Bits Spreadsheet

We have the following HUGE NEW Timken 3 1/2" & 4" Diameter CARBIDE Rock Drill Bits. Please see the table below showing the quantities and sizes that we have available:

Timken Carbide Rock Bits Spreadsheet

We have special prices for the above referenced - Timken 4 inch - 16WD - Carbide Rock Bits.

These bits take a Gardner Denver HI-Leed Drill Steel Thread.

Please see the pictures below of the 4 inch Timken Carbide Rock Bit as well as them connected to a Gardner Denver HI-Leed Drill Steel Adapter.
Asking only $150.00 for these large 4 inch rock bits.

4 inch Timken Carbide Rock Bits with HiLeed Adapter

We also have special prices for the above referenced - Timken 3-1/2 inch - 06-5AH - Carbide Rock Bits.
These bits take a rope thread and we have an adapter that will connect 1" rope thread drill steel to these bits.
Please see the pictures below showing these 3-1/2 inch Timken Rock Bits as well as them connected to a 1 inch rope thread adapter.
Asking only $120.00 for these large 3-1/2 inch rock bits.

Timken 3 1/2 Inch Carbide Rock Bit with rope thread adaptor

We have all of the following HIGH QUALITY AMERICAN made Vulcan Brand and Brunner Lay Brand air tool attachments pictured below at great prices:

These attachments are for heavy duty working with Air Hammers, Air Breakers, Air Jackhammers Jack Hammers & other air pneumatic tools.

Air Tool Attachments

We have a large quantity (QTY 32 ) of New (old stock) Brunner Lay (1-1/8" X 6") Hex X 18" (24" total length) Moil Point ( Points ) available. Asking $15.00 each. Please see the picture below:

Moil Point Air Tool Attachment

We also have a lot of other sized used moil points available in case you are looking for a different size than the one pictured above. Please let me know what size you need and I can get you a great price.

_______________________________________________________________________________

We have the following Clay Spade air hammer breaker tool attachments available: Please see the quantities and the two pictures below.

QTY 1: ( 7/8 x 2 ¾ ) inch hex shank x 19 ½ inch total overall length clay spade (Spade blade is 5 ½ inches wide) Asking $45.00

QTY 6: ( 7/8 x 3 ¼ ) inch hex shank x 21 inch total overall length clay spade (Spade blade is 5 ½ inches wide) Asking $45.00 each

QTY 1: ( 1-1/8 x 6 ) inch hex shank x 23 inch total overall length clay spade (Spade blade is 5 ½ inches wide) Asking $45.00

QTY 1: ( 1 ¼ x 6 ) inch hex shank x 23 inch total overall length clay spade (Spade blade is 5 ½ inches wide) Asking $45.00

Clay Spade Air Tool Attachments

We have the following 3 inch wide chisel bits available. Please the quantities and picture below:

QTY 2: ( 1 x 4 ¼ ) inch hex shank x 22 inch total overall length chisel bit (Bit blade is 3 inches wide) Asking $15.00 each

QTY 2: ( 1 ¼ x 6 ) inch hex shank x 20 inch total overall length chisel bit (Bit blade is 3 inches wide) Asking $20.00 each

QTY 2: ( 1 ¼ x 6 ) inch hex shank x 24 inch total overall length chisel bit (Bit blade is 3 inches wide) Asking $20.00 each

3 Inch Chisel Bit

We have the following 3 inch digging chisel bits available. Please the quantities and picture below:

QTY 1: ( 1-1/8 x 6 ) inch hex shank x 22 inch total overall length digging chisel (Bit blade is 3 inches wide x 12 inches in length) Asking $50.00

QTY 2: ( 1 ¼ x 6 ) inch hex shank x 22 inch total overall length digging chisel (Bit blade is 3 inches wide x 12 inches in length) Asking $50.00 each

3 Inch Digging Chisel Bit

We have the following 3 inch wide flat picks available. Please the quantities and picture below:

QTY 4: ( 3/4 x 2 ¾ ) inch SQUARE shank x 20 inch total overall length Flat Pick (Flat Pick blade is 3 inches wide) Asking $25.00 each

3 inch Flat Pick

We have the following Asphalt Cutters available. Please the quantities and picture below:

QTY 6: ( 1 ¼ x 6 ) inch hex shank x 17 inch total overall length Asphalt Cutter (Cutter blade is 5 inches wide) Asking $45.00 each

Asphalt Cutter

We have the following Asphalt Wedges available. Please the quantities and picture below:

QTY 2: ( 1-1/8 x 6 ) inch hex shank x 19 inch total overall length Asphalt Wedge (Wedge blade is 3 inches wide x 7 inches in length) Asking $45.00 each

QTY 4: ( 1 ¼ x 6 ) inch hex shank x 19 inch total overall length Asphalt Wedge (Wedge blade is 3 inches wide x 7 inches in length) Asking $45.00 each

Asphalt Wedge

We have the following Ground Rod Drivers available. Please the quantities and pictures below:

QTY 1: ( 1-1/8 x 6 ) inch hex shank for driving 7/8 inch diameter rods: Asking $40.00

QTY 2: ( 1-1/8 x 6 ) inch hex shank for driving 1 inch diameter rods: Asking $40.00 each.

Ground Rod Pounding Air Tool Attachments

We have the following Rock Breakers available. Please the quantities and picture below:

QTY 2: ( 1-1/8 x 6 ) inch hex shank x 20 inch total overall length Rock Breaker: Asking $45.00 each

QTY 2: ( 1 ¼ x 6 ) inch hex shank x 18 inch total overall length Rock Breaker: Asking $45.00 each

Rock Breaker Air Tool Attachments

Up for sale are two huge lifting slings: These slings are 2 inches in diameter by 19 feet in total length each. Asking $250.00 each sling.

2 inch diameter lifting slings

We have a quantity of (Seventeen) – NEW (old stock) – (10 inch diameter x 4 foot long) auger sections. These augers sections have a (1-5/8) inch hex drive. Each 4 foot auger section weighs 60 pounds.

We have 5 of the orange augers pictured below.

We have 12 of the blue augers pictured below.

The only difference between the two colored auger sections is that the blue augers have 4 spirals per 4 foot section and the orange augers have 5 spirals per 4 foot section.

As mentioned above: these are New augers that have NEVER been used. The original paint is just scratched a bit from these augers being moved around from time to time in our shop.

Asking only $50.00 per 4 foot auger section.

Please see the pictures below:

10 inch diameter X 4 foot long auger sections

(PICTURED BELOW): We also have the following steel hex Auger replacement drive end adapters available:

Qty 1: ( 1-1/8 ) inch hex drive X 6.75 inches long Asking $10.00

Qty 8: ( 1-5/8 ) inch hex drive X 9 inches long Asking $15.00 each (these fit the augers pictured above)

Qty 1: ( 2-1/4 ) inch hex drive X 10 inches long Asking $20.00

Please see the picture below:

Steel hex Auger replacement drive end adapters

We have the following steel Hex auger drive reducer adapter: This adapter is 2 1/4 inch Male X 1 7/8 inch Male

Asking $45.00 for this reducer.

Please see the pictures below:

Steel Hex auger drive reducer adapter

We have the following New and Used boring auger cutting heads available:

************************************************************************************

We have a (Like new condition) 24 inch diameter X 3 inch hex drive auger cutting head. This auger head weighs 230 pounds. Asking $395.00 OBO for this large auger cutting head.

Please see the picture below:

24 inch diameter auger cutting head - 3 inch hex drive

We have a quantity of TWO (like new condition) Pengo 145X ( 14 inch diameter X 2 inch hex drive ) auger cutting heads. Heads weigh 60 pounds each Asking $195.00 each OBO for these heads.

Please see the picture below:

Quantity 2 - Pengo 145X ( 14 inch diameter X 2 inch hex drive ) auger cutting heads

We also have a nice used 16 inch diameter X 2-1/4 inch hex drive auger cutting head. This auger head weighs 70 pounds. Asking $195.00 OBO for this auger cutting head.

Please see the picture below:

16 inch diameter X 2-1/4 inch hex drive auger cutting head

We have a new 4 inch x 1-3/8 inch hex drive auger cutting head. Asking $75.00 OBO for this new one.

Please see the picture below:

4 inch x 1-3/8 inch hex drive auger cutting head

We have a used 4 inch x 1-3/8 inch hex drive auger cutting head. Asking $40.00 OBO for this used one.

Please see the picture below:

Used 4 inch x 1-3/8 inch hex drive auger cutting head

NEW BRASS suction hose screen for 4 inch diameter suction hose

(Pictured Above) Brass Suction Hose Screen for 4 inch diameter suction hose. The screen has standard 4 inch female hose threads. The OD of the screen is 9 inches and the screen is 4.5 inches in height. The screen openings are 1.5 inch X 1.5 inch square. Asking $35.00 OBO for this item.

(Pictured Above) Very good used 4 inch diameter X 50 foot long mill cloth disharge hose with standard 4 inch male and female screw type hose fittings. Asking $50.00 for this item.

(Pictured Above) Very good NEW - OLD STOCK 4 inch diameter vinyl / rubber by 50 foot long disharge hose with standard 4 inch male and female screw type hose fittings. Asking $35.00 for this item.

Enter content here

Construction Equipment Company LLC
21720 West Eight Mile Road
Southfield, Michigan USA 48075

Phone: (248) 948-9919

Email Us With Any Questions Or Requests!

Please email us with any questions.